Our "Senza categoria"

CBGserie

INDUSTRIAL AIR CONDITIONERS HEAVY DUTY FOR OPERATOR’S CABIN AND CONTROL ROOM

capacity

COOLING CAPACITY

3kW >> 10kW

applications_icons-temperature_gen

RANGE

-20°C / +80°C

SPECS gas

REFRIGERANT

R407c/R134a/R227ea

CBG CONDIZIONATORE

INDUSTRY

iron and steel

off shore and marin

mining

APPLICATION

crane cab

electrical rooms

shelters

STANDARD FEATURES

The CBG air conditioners are developed in a compactconstruction and designed for the thermoregulation of operator cabins, electrical rooms and containers.

Are suitable for installation on mobile stations, cranes and maneuvering stages, placed in environments with high temperature and dust concentration or aggressive atmospheres.

Thanks to Refrind’s experience, CBG air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.

packaged compact frame with vertical construction, suitable for wall mount


housing made in high thick steel, RAL5010 powder painted with textured finishing


easy access for service and maintenance through front removable panels
lifting eyebolts for easy handling


finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the dirt accumulation

air condensation with forced ventilation


HFC refrigerant fluid with low environmental impact:

  • mod. CBG 18: R407C
  • mod. CBG 20 – 100: R134a

compressor with anti-vibrating dampers:

  • mod. CBG 18 – 62: hermetic compressor
  • mod. CBG 100: SCROLL® compressor

refrigerant circuit made of fine alloys brazed copper tubes, equipped with expansion device, dryer filter, high and low pressure switch. Tubes arrangement allows the air conditioners to operate on high vibrating cranes

on-board power panel with easy access to internal parts, complete of all devices needed to a safe and autonomous operation


electro-mechanical consolle for management of cooling and heating functions, summer and winter mode selection; the consolle is positioned on recirculation airside


standard signals: general alarm, high temperature alarm

high pressure recirculation centrifugal fans with double speed (except for CBG 18-20-100)


condenser axial fans, with condensation control


synthetic media washable air filter, on recirculation air side possibility of air distribution through duct (starting from CBG 30)

CBRserie

INDUSTRIAL AIR CONDITIONER HEAVY DUTY SPLIT TYPE FOR OPERATOR’S CABIND AND ELECTRICAL ROOMS

capacity

COOLING CAPACITY

6kW >> 25kW

applications_icons-temperature_gen

RANGE

-20°C / +80°C

SPECS gas

REFRIGERANT

R134a / R227ea

CBR condizionatore

INDUSTRY

iron and steel

off shore and marine

cement industry

APPLICATION

cabine crab

electrical rooms

shelters and containers

STANDARD FEATURES

The CBR series air conditioners have been developed for the climate control of operator cabins, process control rooms and electrical rooms placed in harsh industrial installations; with dusty and aggressive atmosphere or extreme temperatures such as mobile cranes for the steel industry, mineral handling lines or any other application of such requirements.

The air conditioners are split type, made up of two units: moto-condensing unit of different sizes to which different types of evaporator units can be combined, for wall or ceiling mount, with direct or ducted air circulation.

Thanks to Refrind’s experience, CBR air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.

MOTO-CONDENSING UNIT (CBR SERIES)

frame suitable for ground installation


bearing frame made of high thickness steel, RAL5010 blue
powder painting with textured finishing


easy service access thanks to lateral removable panels


lifting eyebolts for easy handling


condenser coil made of high thickness copper tubes and aluminium fins, assembled with wide fin spacing to avoid accumulation of dirt


suitable for outdoor installation

air condensed type with four side air suction and upward discharge of heat


full charge of HFC R134a refrigerant fluid with low environmental impact


SCROLL® compressor on anti-vibrating dampers, suitable for high c0pression ratio


refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dehydrator filter, high and low pressure switch and condensation control


pipes arrangement allows the unit to operate on high vibrating cranes

on board watertight power panel containing safety and control devices of the machinery, complete of terminals strip and thermo-magnetic protections

axial fans, with condensation control

EVAPORATING UNIT

frame suitable for wall installation (WD and WU series) or ceiling mounting (CS and CD series)


housing made in steel thick plate, RAL5010 powder painting with textured finishing


easy access to internal components for maintenance activity through removable panels


lifting eyebolts for easy handling


evaporator coil made of high thickness copper tubes and aluminium fins, assembled with wide fin spacing to avoid accumulation of dirt


stainless steel tray for condensate recovery

refrigerant circuit made of fine alloys brazed copper tubes, equipped with thermostatic valve. Pipes arrangement allows the unit to operate on high vibrating stages

electronic controller with panel mount display for the control of cooling function or also dehumidification and heating (optional)

radial or centrifugal high-pressure fans air filters on recirculation possibility to connect to air distribution system (CWU e CCD series)

CBTserie

INDUSTRIAL AIR CONDITIONERS  HEAVY DUTY FOR POWER PANELS AND ELECTRICAL ROOMS

capacity

COOLLING CAPACITY

1kW >> 4kW

applications_icons-temperature_gen

RANGE

-30°C / +80°C

SPECS gas

REFRIGERANT

R134a / R227ea

CBT CONDIZIONATORE

INDUSTRY

iron and steel

cement

mining

APPLICATION

power panels

electrical rooms

STANDARD FEATURES

The CBT air conditioners are designed for the thermoregulation of automation panels and electrical rooms in general.

Are suitable for installation in the most harsh environment of the industry as moving cranes, bulky material handling lines and in all application where present high dusty or corrosive atmosphere, high vibration or extreme temperature.

Thanks to Refrind’s experience, CBT air conditioners result in eliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.

packaged frame with compact construction, suitable for ground installation and duct connection


housing made in thick steel plate, RAL5010 powder painting with textured finishing


easy service access thanks to frontal removable panels


lifting eyebolts for easy handling


suitable for outdoor installation


finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the accumulation of dirt

air condensation with forced ventilation


HFC R134a refrigerant fluid with low environmental impact


SCROLL® compressor with anti-vibrating dumpers


refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dryer filter, high and low pressure switch


piping specific arrangement to allow operation in high vibrating and accelerating application

on-board factory wired power panel with easy access to internal parts. It comprehend all devices necessary to the autonomous and safe operation


electronic controller inside AC unit for the management of cooling and heating (optional) function


standard signals: general alarm, high temperature alarm, remote ON/OFF enable

condenser axial fans, with condensation control


high head recirculating fans:

  • mod. CBT 602 – 103: axial fans
  • mod. CBT 153 – 203 : centrifugal fans

high flexibility for air handling thanks to the multiple accessories and duct connection

CDHserie

INDUSTRIAL AIR CONDITIONERS FOR POWEL PANELS AND ELECTRICAL CONTAINERS – HEAVY DUTY

capacity

COOLER CAPACITY

1kW >> 4kW

applications_icons-temperature_gen

RANGE

-30°C / +80°C

SPECS gas

REFRIGERANT

R134a / R227ea

CBT CONDIZIONATORI

INDUSTRY

iron and steel

cement

mining

APPLICATION

electrical boards

electrical rooms

STANDARD FEATURES

The CDH air conditioners are designed for the thermoregulation of automation panels and electrical shelters in general. Are suitable for installation in the most harsh environment of the industry as moving cranes, bulky material handling lines and in all application where present
high dusty or corrosive atmosphere, high vibration or extreme temperature.

Thanks to Refrind’s experience, CDH air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.

packaged frame with vertical construction, suitable for installation on electrical board external side:

  • mod. CDH 10-28: wall fixing
  • mod. CDH 30-40: ground or wall fixing

housing made in thick steel plate, powder painted:

  • mod. CDH 10-28: RAL7035 with textured finishing
  • mod. CDH 30-40: RAL5010 with textured finishing

easy servis access to internal parts through removable panels


lifting eyebolts for easy handling


designed for outdoor installation exposed to weathering


finned heat exchangers, composed of high-thickness copper tubes and thick aluminium fins, with wide fin spacing to avoid the accumulation of dust

air condensed with forced ventilation


HFC refrigerant fluid with low environmental impact


hermetic compressor with anti-vibrating dampers


refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dryer filter, high and low pressure switches (CDH10-20 only high pressure sw.). Pipingarrangement allows the air conditioners to operate on high vibrating stages

on-board power panel with easy access to internal parts,complete of all devices needed to a safe and autonomous operation


electronic controller, for cooling and heating control:

  • mod. CDH C10-28: the controller is positioned on recirculation air side (operable from electrical board internal side)
  • mod. CDH C30-40: the controller is positioned on condensation air side (operable from electrical board external side)

standard signals: general alarm, high temperature alarm, remote ON/OFF enable

external centrifugal fans, with condensation control


high pressure recirculating fan, centrifugal type

CMDserie

INDUSTRIAL AIR CONDITIONERS FOR OPERATOR’S CABIN AND CONTROL ROOM – HEAVY DUTY

capacity

COOLING CAPACITY

3kW >> 3.5kW

applications_icons-temperature_gen

RANGE

-20°C / +80°C

SPECS gas

REFRIGERANT

R407c/R134a/R227ea

CMD condizionatore

INDUSTRY

iron and steel

naval

energy

APPLICATION

operator cabins

elecrtic rooms

containers

STANDARD FEATURES

The CMD air conditioners are developed in a compact construction and designed for the thermoregulation of operator cabins, electrical rooms and containers. Are suitable for installation on mobile stations, cranes and maneuvering stages, placed in environments with high temperature and
dust concentration or aggressive atmospheres.

Thanks to Refrind’s experience, CMD air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.

packaged frame with vertical construction, suitable for installation on cabin internal side, wall fixing


housing made in steel with RAL9010 powder painting and
textured finishing


easy service access through single front removable panel
lifting eyebolts for easy handling suitable for weathering exposure (with optional anti-rain kit)


finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the accumulation of dust


electrical heating as standard composed by armored elements made of steel finned tube, comprehended high limit safety thermostat

air condensation with forced ventilation


HFC refrigerant fluids with low environmental impact


hermetic rotative compressor with anti-vibrating dampers (hermetic piston type for versions “Y” and “H”)


refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dryer filter, high pressure switch. Tubes arrangement allows the air conditioners to operate on high vibrating cranes

on-board factory wired power panel with easy access to internal parts. It comprehend all devices necessary to the autonomous and safe operation


electronic user controller for management of cooling and heating (optional); the controller is positioned internally on user’s consolle


standard signals: general alarm, high temperature alarm

high head centrifugal fans, with condensation control


recirculation air filter, consisting of synthetic media washable membrane, G4 filter class

PRT pressurizzatore

PRT series

Pressurizer with self-cleaning filter

AIR FLOW

up to 1000 m3/h

applications_icons-filtration

FILTRATION

fine

APPLICATIONS

operator cabins

panels and electrical rooms

containers
and shelters

If you continue, you accept our cookies. more info

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Close